Description

A "MUST-HAVE" PEDAL!
The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.

- Compact noise suppression pedal for eliminating noise and hum in guitar and bass effects and amplifier setups
- Unique noise detection circuit preserves the natural attack and envelope of an instrument's sound
- Threshold and Decay knobs allow for shaping the elimination/suppression as desired
 

FREQUENTLY ASKED QUESTIONS

1. Does the BOSS NS-2 work with single coil feedback through a tube amp?

• Yes. The BOSS NS-2 will help in reducing the noise of the signal. However, reducing too much noise can affect the sustain and volume.

2. Can I use the BOSS NS-2 with a fuzz box? If yes, how?

• Yes. You should connect the fuzz box to the send/return loop of the BOSS NS-2.

3. Does the BOSS NS-2 reduce feedback?

• Yes. The BOSS NS-2 works well in reducing noise and feedback.

4. Can I use a power adapter for the BOSS NS-2?

• Yes.

5. What is the difference between the input/output and the send/return on the BOSS NS-2?

• On the BOSS NS-2, the input is where you plug your guitar while the output is for the signal going out of the NS-2 to the amp. The send/return is where you connect the other pedals going through the loop.

6. Can I use the BOSS NS-2 for the Fender Mustang Bass?

• Yes.

7. Can I use the BOSS NS-2 with an electric keyboard?

• Yes.

8. Can I use the BOSS NS-2 to reduce the noise of a “wah” pedal?

• Yes.

9. Can I connect the BOSS NS-2 to two amps to get a stereo setup?

• Yes, you have to connect it to a splitter first.

10. Will the BOSS NS-2 work with distortion effects?

• Yes.

11. Is the BOSS NS-2 compatible with bass?

• Yes.

12. Does the BOSS NS-2 affect the tone?

• No. The BOSS NS-2 makes the sound clearer by reducing the noise.

Specifications

• Nominal Input Level: -20 dBu
• Input Impedance: 1 M ohm
• Nominal Output Level: -20 dBu
• Output Impedance: 1 k ohm
• Recommended Load Impedance: 10 k ohms or greater
• Bypass: Buffered bypass
• Controls: MODE selector switch, DECAY knob, THRESHOLD knob, Pedal switch
• Indicator: CHECK/MUTE indicator (Used for indication of check battery), REDUCTION indicator
• Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, SEND jack: 1/4-inch phone type, RETURN jack: 1/4-inch phone type, DC IN jack, 9V DC OUT jack
• Power Supply: Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
• Current Draw: 25 mA
• Expected battery life under continuous use: Carbon: Approx. 11 hours, Alkaline: Approx. 24.5 hours *These figures will vary depending on the actual conditions of use.
• Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Carbon-zinc battery (9 V, 6F22)
• Options (sold separately): AC adaptor: PSA series, Parallel DC Cord: PCS-20A

Size & Weight

• Width: 73 mm, 2-7/8 inches
• Depth: 129 mm, 5-1/8 inches
• Height: 59 mm, 2-3/8 inches
• Weight (including battery): 415 g, 15 oz

* 0 dBu = 0.775 Vrms
* The specifications are subject to change without notice.